Server Installation Guide

Version 31 by Robin Shen
on Dec 24, 2009 08:56.

<< Changes from 30 to 31
compared with
Current by Robin Shen
on Dec 24, 2009 09:06.

 
Key
These lines were removed. This word was removed.
These lines were added. This word was added.

View page history


There are 1 changes. View first change.

 h3. Supported operating systems
  
 * Windows 2000/XP/Vista/7, 32 bit and 64 bit, x86 and IA architecture
 * Linux, 32 bit and 64 bit, x86 and PowerPC architecture
 * Mac OS X, 32 bit and 64 bit
 * Solaris, 32 bit and 64 bit, Sparc and x86 architecture
 * AIX, 32 bit and 64 bit, PowerPC architecture
 * HP-UX, 32 bit and 64 bit, IA and PARISC architecture
 * FreeBSD, 32 bit and 64 bit, x86 architecture
  
 h3. Memory requirement
  
 * 512M minimum, 1G recommended
  
 h3. Installation Steps
  
  # Download QuickBuild2 distribution from [http://quickbuild.pmease.com], select the latest build for project _PMEase.QuickBuild2_ and download the distribution appropriate for your operation system.
  # Download QuickBuild2 distribution from [http://build.pmease.com], select the latest build for project _PMEase.QuickBuild2_ and download the distribution appropriate for your operation system.
 # Extract the downloaded file into the selected installation directory.
 # Make sure you have JDK5 or JDK6 installed. For Sun JDK5, QuickBuild requires at least update 11. Download the appropriate JDK version from [http://java.sun.com] if needed.
 # Make sure the _java_ command exists in the system path; if not, you will need to modify the file _conf/wrapper.conf_ under QuickBuild's installation directory, and point the entry _wrapper.java.command_ to path of the java command.
 # For Windows platform, run _bin/server.bat_ to start the server; for Unix platforms, run command _bin/server.sh console_ to start the server. Please note:
 #* Please make sure the user running the command has *full access rights* to QuickBuild server's installation directory.
 #* Monitor the console window for any error or warning messages. Don't get upset about the warning message _plugin xxxxx is not enabled as it needs to be configured_, it simply means that the plugin needs to be configured before it can be used. Refer to [plugin management|Plugin Management] for how to configure a plugin.
 #* This command runs QuickBuild server in console mode. Follow [this guide|Install As System Service] to install the server as system service so that it can be auto-started when the machine reboots.
 #* By default, QuickBuild server runs on port 8810. If this port is used by other process, you can change the port number to an unused port by editing the file _conf/node.properties_.
 # After the server starts up, follow the instruction in the console to open a browser window and connect to the server. Following browsers are supported:
 #* Internet Explorer 7.0 or higher
 #* Firefox 2.0 or higher
 #* Safari 3.0 or higher
 # By default, QuickBuild uses embedded database for demonstration purpose. For production usage, please switch to other serious database following guide in [data management section|Data Management].