h3. Supported operating systems
* Windows 2000/XP/Vista/7, 32 bit and 64 bit, x86 and IA architecture
* Linux, 32 bit and 64 bit, x86 architecture and PowerPC architecture
* Mac OS X, 32 bit and 64 bit
* Solaris, 32 bit and 64 bit, Sparc and x86 architecture
* AIX, 32 bit and 64 bit, PowerPC architecture
* HP-UX, 32 bit and 64 bit, IA and PARISC architecture
* FreeBSD, 32 bit and 64 bit, x86 architecture
h3. Memory requirement
* 512M minimum, 1G recommended
h3. Installation Steps
# Download QuickBuild distribution for your platform from [http://www.pmease.com/downloads].
# Extract the downloaded file into the selected installation directory.
# Make sure you have JDK5 or JDK6 installed. For Sun JDK5, QuickBuild requires at least update 11. Download the appropriate JDK version from [http://java.sun.com] if necessary.
# Make sure the _java_ command exists in the system path; if not, you will need to modify the file _<QuickBuild install dir>/conf/wrapper.conf_, and point the entry _wrapper.java.command_ to path of the java command.
# If you run QuickBuild with Sun JDK or [OpenJDK|http://openjdk.java.net], make sure to edit file _<QuickBuild install dir>/conf/wrapper.conf_ and add below entry to avoid using up permgen space:
{code}wrapper.java.additional.4=-XX:MaxPermSize=256m{code}
You may add this line after the line _#wrapper.java.additional.3=-Dreset_.
# Open a command window, switch to _bin_ folder under the installation directory, and run command _bin/server.(bat|sh) console_ to start the server. Please note:
#* Make sure the user running the command has *full access rights* to QuickBuild server's installation directory.
#* Monitor the console window for any error or warning messages. Don't get upset about the warning message _plugin xxxxx is not enabled as it needs to be configured_, it simply means that the plugin needs to be configured before it can be used. Refer to [plugin management|Plugin Management] for how to configure a plugin.
#* This command runs QuickBuild server in console mode. Follow [this guide|Install As System Service] to install the server as system service so that it can be auto-started when the machine reboots.
#* By default, QuickBuild server runs on port 8810. If this port is used by other process, you can change the port number to an unused port by editing the file _conf/node.properties_.
# After the server starts up, follow the instruction in the console to open a browser window and connect to the server. Following browsers are supported:
#* Internet Explorer 7.0 or higher
#* Firefox 2.0 or higher
#* Safari 3.0 or higher
#* Chrome 4.0 or higher
# By default, QuickBuild uses embedded database for demonstration purpose. For production usage, please switch to other serious database following guide in [data management section|Data Management].
* Windows 2000/XP/Vista/7, 32 bit and 64 bit, x86 and IA architecture
* Linux, 32 bit and 64 bit, x86 architecture and PowerPC architecture
* Mac OS X, 32 bit and 64 bit
* Solaris, 32 bit and 64 bit, Sparc and x86 architecture
* AIX, 32 bit and 64 bit, PowerPC architecture
* HP-UX, 32 bit and 64 bit, IA and PARISC architecture
* FreeBSD, 32 bit and 64 bit, x86 architecture
h3. Memory requirement
* 512M minimum, 1G recommended
h3. Installation Steps
# Download QuickBuild distribution for your platform from [http://www.pmease.com/downloads].
# Extract the downloaded file into the selected installation directory.
# Make sure you have JDK5 or JDK6 installed. For Sun JDK5, QuickBuild requires at least update 11. Download the appropriate JDK version from [http://java.sun.com] if necessary.
# Make sure the _java_ command exists in the system path; if not, you will need to modify the file _<QuickBuild install dir>/conf/wrapper.conf_, and point the entry _wrapper.java.command_ to path of the java command.
# If you run QuickBuild with Sun JDK or [OpenJDK|http://openjdk.java.net], make sure to edit file _<QuickBuild install dir>/conf/wrapper.conf_ and add below entry to avoid using up permgen space:
{code}wrapper.java.additional.4=-XX:MaxPermSize=256m{code}
You may add this line after the line _#wrapper.java.additional.3=-Dreset_.
# Open a command window, switch to _bin_ folder under the installation directory, and run command _bin/server.(bat|sh) console_ to start the server. Please note:
#* Make sure the user running the command has *full access rights* to QuickBuild server's installation directory.
#* Monitor the console window for any error or warning messages. Don't get upset about the warning message _plugin xxxxx is not enabled as it needs to be configured_, it simply means that the plugin needs to be configured before it can be used. Refer to [plugin management|Plugin Management] for how to configure a plugin.
#* This command runs QuickBuild server in console mode. Follow [this guide|Install As System Service] to install the server as system service so that it can be auto-started when the machine reboots.
#* By default, QuickBuild server runs on port 8810. If this port is used by other process, you can change the port number to an unused port by editing the file _conf/node.properties_.
# After the server starts up, follow the instruction in the console to open a browser window and connect to the server. Following browsers are supported:
#* Internet Explorer 7.0 or higher
#* Firefox 2.0 or higher
#* Safari 3.0 or higher
#* Chrome 4.0 or higher
# By default, QuickBuild uses embedded database for demonstration purpose. For production usage, please switch to other serious database following guide in [data management section|Data Management].